Darrien Eouse

  • FL AU#4535
  • TX AU#17655
  • GA AU#004220
  • LA AU#2041
Licenses & State Guides

What to Inspect on a Used Scissor Lift Before You Bid

By Braden Chupp, The Lift Bros

A used scissor lift at auction can be a great buy, or it can need a battery pack, pump or control box before it’s ready for work. Use the auction preview if it’s available. If you can’t attend, ask for photos, service records and video of an authorized demonstration.

Batteries on electric lifts

A replacement battery pack can be one of the biggest expenses on an electric scissor lift. Look for heavy corrosion, cracked cases or swollen sides. Ask how long the lift has been sitting, when the batteries were installed and whether the charger is included. Ask a qualified technician about battery maintenance and a trained operator to demonstrate that the pack drives and lifts under load.

The hour meter and what the wear tells you

Note the hours shown, then look at the machine. Low hours alongside worn tires or heavy deck wear deserve a closer look. The meter may have been replaced. Use the hours alongside service records and the condition you can verify.

Hydraulics and signs of drift

From a safe position, look for fresh oil around the lift cylinder, hoses and pump. During an authorized demonstration, watch for jerky movement or unexpected lowering and listen for unusual pump noise. Ask a qualified technician to investigate those symptoms.

Pothole guards and the tilt alarm

Ask a trained operator to demonstrate the pothole protection and tilt alarm if the model has them. Have the operator follow the manufacturer’s test procedure for that model. Confirm whether either system has a known fault.

Platform controls and emergency stop

Ask the operator to demonstrate the ground and platform controls, including lift, lowering, drive, steering and emergency stops. Ask how emergency lowering works on that machine and have it demonstrated where the preview allows.

Scissor arms, pins and frame

Look for bent arms, cracked welds, fresh repairs and signs of impact to the chassis. Ask a qualified technician to assess loose pins, worn bushings or unusual side-to-side movement. Stay clear of moving parts and the area beneath the platform.

Tires, deck and rails

Check for missing chunks or flat spots in the tires. Ask about the condition of the deck and whether the extension deck locks in place. Check for damaged or missing rails and ask whether the gate closes and latches properly.

Paperwork and identity

Make sure the serial plate is legible and matches the auction listing. Ask for service records and the date of the most recent documented inspection. Confirm the platform height, rated capacity and stowed dimensions against your job and transport.

Set your maximum bid

Start with what a comparable ready-to-work lift costs. Allow for repairs, buyer’s premium, taxes, loading and freight before you decide what to bid. Confirm the pickup deadline and who handles loading.

Follow the auction’s preview rules and the manufacturer’s instructions. Arrange a qualified inspection when condition is uncertain.